This Thermal House

If you want to make your house more efficient at repelling the unpleasantness outdoors (whether hot or cold), what should you do first? Insulate the walls? Insulate the ceiling? The roof? Better windows? Draft elimination? What has the biggest effect? While I have regrettably little practical experience tightening up a house (it’s on my bucket list), I at least do understand heat transfer from a physics/engineering perspective, and can walk through some insightful calculations. So let’s build a fantasy house and evaluate thermal tradeoffs at 1234 Theoretical Lane.

Continue reading

Rocking the AC

When it comes up in casual conversation that I do not generally heat or cool my house, people either move to another seat or look at me with some mixture of admiration and disbelief. When non-Californians then find out that I live in San Diego, they might huff or spew, which often involves some embarrassing projectile escaping their mouth. But the locals are more consistently impressed—more so by my forsaking heat than AC (San Diego has very mild summers by U.S. standards). This summer, I turned on the AC for the first time since we bought the house three years ago. All in the name of science! I was blown away. Here is what I learned.

Continue reading

Heat Pumps Work Miracles

Part of the argument that we cannot expect growth to continue indefinitely is that efficiency gains are capped. Many of our energy applications are within a factor of two of theoretical efficiency limits, so we can’t squeeze too much more out of this orange. After all, nothing can be more than 100% efficient, can it? Well, it turns out there is one domain in which we can gleefully break these bonds and achieve far better than 100% efficiency: heat pumps (includes refrigerators). Even though it sounds like magic, we still must operate within physical limits, naturally. In this post, I explain how this is possible, and develop the thermodynamic limit to heat engines and heat pumps. It’s a story of entropy.

Continue reading

Burning Desire for Efficiency

Ever wonder how efficient it is to heat water? Of course you have! Ever measured it? Whoa, mister, now you’ve gone too far!

I recently devised a laser-phototransistor gauge to monitor my natural gas meter dial—like ya do. As a side benefit, I acquired good data on how much energy goes into various domestic uses of natural gas. Using this, I was able to figure out how much energy it takes to heat water on the stove, cook something in the oven, or heat water for a shower. Together with the knowledge of the heat capacity of water, I can compute heating efficiency from my measurements. What could be more fun? I’ll share the results here, some of which surprised me.

Continue reading

Heat those Feet!

Infrared image of a cold left foot (25°C with 19°C toes), compared to a warm (33°C) right foot.

One of the more bothersome aspects of living in an unheated house (with tile floors in much of the house, in my case) is having cold feet. Spring has arrived, so perhaps this post is not as timely as it might otherwise have been. But let’s consider the energy costs of various approaches to warming up cold feet.

The main problem I have with cold feet is that they make it hard to go to sleep. Otherwise cold feet don’t seem to distract me from normal activities. But let’s say that your feet are cold and that you cannot stand it any longer, and therefore must warm them up. I’ll look at a number of options, assessing how much energy is consumed for each. We’ll try hot water in the sink, a space heater (or blow dryer) under a blanket, a heating pad wrapped around the feet, or good-old metabolic energy.

Continue reading

Home Heating for the Hardy

Sleeping warm

If you are on-board with the sentiment that we should strive to reduce the amount of energy we consume as a means to relieve pressure on a world suffering impending energy scarcity, then you probably want to know how one might proceed. In this post, I will describe the single-biggest energy-saving strategy I have employed in my home in the past five years, which slashed my natural gas consumption by almost a factor of five.

Last week, I described how to read gas meters, in the process discovering how onerous pilots lights can be. As a result of initial exploration of my energy footprint in the spring of 2007, I shut off the furnace pilot light for the summer, which I figured accounted for two-thirds of my warm-season natural gas use. When winter came, my wife and I challenged ourselves to hold off on re-igniting the pilot light until it got too cold for us to bear. That day never came. The result was a dramatic reduction in natural gas use.

In this post, I will talk about some of the ups and downs of adjusting to a colder house in the winter. Granted, we live in moderate San Diego, and could not get away with the same tactic in many locales. Even so, I will quantify the gains one might expect elsewhere for similar living conditions.

Continue reading